Specifications

Model Numbers Keypads:

HQWD-W1B,   1 Button Keypad

HQWD-W2BS, 2 Button Keypad

HQWD-W3BS, 3 Button Keypad

HQWD-W4BS, 4 Button Keypad

HQWD-W5B,   5 Button Keypad

HQWD-W6B,   6 Button Keypad

HQWD-W7B,   7 Button Keypad

HQWD-W1RLD,  Dual Group with Raise/Lower Keypad

HQWD-W2RLD,  Dual Group with Dual Raise/Lower Keypad

HQWD-W3BD,    Dual Group Keypad

HQWD-W3BSRL 3 Button with Raise/Lower Keypad]

HQWD-W4S      4 Button with Raise/Lower Keypad

HQWD-W5BRL   5 Button with Raise/Lower Keypad

HQWD-W6BRL   6 Button with Raise/Lower Keypad

Power 24 V 30 mA IEC PELV / NEC® Class 2
Typical Power Consumption0.6 W; 1 Power Draw Unit (PDU)
Test conditions: all backlights on medium intensity, two LEDs on (two presets active), keypad powered at 24 V
Regulatory Approvals UL, cUL , NOM, FCC, IC, COFETEL
Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing. Indoor use only.
Communications Connects to QS wired device link on Homeworks® QS processor.
ESD Protection Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
Surge Protection Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended
Practice on Surge Voltages in Low-Voltage AC Power Circuits.
Power Failure Power failure memory: should power be interrupted, the keypad will return to its previous state when power is restored.
Mounting U.S. wallbox 3 ½ in (89 mm) deep, 2 ¼ in (57 mm) deep minimum, or low-voltage mounting bracket
Wiring Control wire must be 1 pair 18 AWG (1.0 mm2) IEC PELV / NEC® Class 2 for power and 1 pair 22 to 18 AWG (0.5 to 1.0 mm2) IEC PELV / NEC® Class 2 twisted/shielded for data
Warranty www.lutron.com/TechnicalDocumentLibrary/Warranty.pdf

HomeWorks® QS Wired seeTouch® Designer Keypads
• Green status LEDs.
• Backlit button/engraving.
• Field-changeable Replacement Kits make for easy customization.
• All terminal block inputs are over-voltage and miswire-protected against wire reversals and shorts.

Design Features
• Use Lutron® Designer (Claro® or Satin Colors®) wallplates. Wallplates are sold separately.
• Lutron® Claro® and Satin Colors® wallplates snap on with no visible means of attachment.
• Use Replacement Kits to change color, button configuration, or engr